The company manufactures writing, printing, packaging & wrapping papers and its share in the country's total production is 4%. The company also manufactures paper as per the specification of the end users including industrial users. The end use of paper / paper board is for diaries, calendars, multicolour printing, ledger books, cheque printing, share certificate and other permanent records, railway tickets, boarding passes, corrugated and packaging and core make [ for Textile Industry], tube making, soap wrapping, coating base paper, continuous stationary, cyclostyling, photo copying etc.

The company has experienced no problem in the marketing of its products. The entire sale of paper is made through various paper dealers spread over the country.

TECHNICAL PROCESS:

The mill is based on conventional kraft process using wood as the main raw material. Wood is chipped in Chippers and fed to digesters for cooking in which cooking chemicals are added. After cooking the pulp the washed, screened, cleaned, bleached and stored. The company has two streams of Brown Stock Washers and of bleach plants. 91% and above of spent chemicals are recovered in the recovery plant and in the process of this recovery substantial steam is also generated.

The pulp is refined in the Stock preparation section and treated with sizing chemicals, dyes and loading materials before transferring to the Paper Machine section for manufacturing paper. The company has three machines which are of standard design consisting of wire part, press part and dryer section. Paper M/c. III has been re-built in 1993 and has twin wire system known as Papriformer machine. PM II has been rebuilt in 2000 & PM I was rebuilt in 2004. The Paper M/c. No. II is MG machine whereas PM I & III are MF machines. The company has fully equipped finishing and converting section for rewinding, cutting and packing of the paper in reels or sheets.

The company also has Paper M/c Nos.IV & V for manufacture of multi-layer board (Duplex Board). The Paper M/c No.V was commissioned in 1996 and the Paper M/c No.IV, in 2002. These machines use recycled fibre and are therefore eco-friendly. However, some quantity of mill made pulp is also used for top layer of the duplex board to improve the quality and reduce the cost.


The company has gone for process automation and installed Basis Weight and Moisture Controller on PM I & III and CD Profiler / Digital Control Drive on PM III. The FBC boiler has also been provided with computer for process control. The Chemical Recovery Boiler, Evaporators, Rotary Limekin, Clo2 Plant & Pulp Wash Plant are being operated through DCS/PLC Control system.

For more information Contact Us.